• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Vicmarc VM100 Standard Jaws

Status
Not open for further replies.
Joined
Oct 5, 2019
Messages
89
Likes
37
Location
Rio Rancho, NM
Website
www.cutthroatwoodworks.com
FOR SALE: Standard jaws (2" per CSUSA catalog) fitting a Vicmarc VM90/VM100 four-jaw chuck. Reference number is part no. V00657 on Vicmarc website. Size diagram borrowed from Vicmarc website for clarity. Jaws are lightly used showing light wear at the center where Sorby steb drive was used. Unfortunately, I don't have original packing. Selling as I have another set of VM100 standard jaws and will not use these. Included are eight (8) VM90/VM100 spare jaw screws (new, unused). Priced at $40 plus shipping. Please message here or email (kershaw.scott@gmail.com) with any concerns or questions.

Thank you,
Scott
 

Attachments

  • CAC17FFC-A995-4CB8-8B05-C4DFC23F4C14.jpeg
    CAC17FFC-A995-4CB8-8B05-C4DFC23F4C14.jpeg
    545.5 KB · Views: 7
  • V00657-1__63787.1465576316.jpg
    V00657-1__63787.1465576316.jpg
    8.8 KB · Views: 7
Status
Not open for further replies.
Back
Top