• July 2025 Turning Challenge: Turn a Multi-axis Weed Pot! (click here for details)
  • Congratulations to James Seyfried for "NE Red Oak II" being selected as Turning of the Week for July 21, 2025 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Wood ID

Joined
Jun 9, 2004
Messages
1,223
Likes
49
Location
Haslett, Michigan
msu norway maple.jpg

Got some wood from Mich State Univ to turn some bowls for the Presidents office for the upcoming "capital" drive. The grounds people thought this piece was a Norway Maple. (stored in an area with lots of cut wood that they eventually want to mill and sell, or commission people to make things).
Not sure it should be this pretty. I could see tiger stripes when I chain sawed it up, and tonite I started the first half of a small deep barked vessel. Gorgeous stripes. There had been no tendency to split at the pith even after the long log has sat for a while on campus. I am hoping for beautiful wood. Need to be sure Of the ID. Sent this pic tonite to the head of grounds dept too. I have no other info (leaves, "seeds', etc) Google said it was a light wood with a non distinctive pale heartwood.
The other wood in front of it is ash (boring), a piece of white oak and a piece or 2 of white mulberry. The pres office wanted something from the Beal gardens (none available) or from around the street where the admin bldg is. My choices were limited. The Norway maple is from the new art center and since it is a show piece bldg I am hoping this maple would "work" for them. It works for me!!!!! Gretch
 
maybe use one of those oval chucks I hear tell of on that Norway maple in the foreground.......
 
Hmmm, could you translate that??? Gretch

I can translate, I speak hillbilly[SUP]1[/SUP].

Charlie recommends that you procure a Vicmarc VOD300 Oval Turning Device in order to create some oval vessels using the beautiful large piece of wood closest to the camera. Implied but not stated is that he may wish to borrow it sometime in the future.

[SUP]1[/SUP] apologies to the movie, Airplane!
 
that's a roger on the translation
 
"norway" maple bowl

Here is the first bowl I have made 2 days ago. Nice tiger striping. It was fairly wet, and now drying for sanding and finishing. This wood is from the end of bigger piece ( not the one Charlie has his eye on) so is deep (6 1/2") and 5.5" wide. Altho this is thick, there is no sign of movement or cracking, Gretch

5.5tallx6.5inch wide-Norway map.jpgNorway maple-Kresge.jpg
 
Back
Top