This is a Woodcut 2000 hollowing tool with minimal wear. It is identical to the current model Woodcut Pro-Form tool except for the spigot at the base of the handle. It uses the same cutter heads as the newer tool.
There are 2 cutter heads & shafts, one straight & one curved. Both are approx. 13 inches long. The handle is 13" long. Handle & cutter bar joined are 23" long.
The cutter is hardened M2 high-speed steel & sharpens easily with a diamond file.
Designed for cross and end grain scenarios as well as dry and green wood. Not shown are included allen wrench & special wrench for cutter head adjustment.
Set sells new for $469. Asking $225 plus postage.
Email to eastbob3@gmail.com
There are 2 cutter heads & shafts, one straight & one curved. Both are approx. 13 inches long. The handle is 13" long. Handle & cutter bar joined are 23" long.
The cutter is hardened M2 high-speed steel & sharpens easily with a diamond file.
Designed for cross and end grain scenarios as well as dry and green wood. Not shown are included allen wrench & special wrench for cutter head adjustment.
Set sells new for $469. Asking $225 plus postage.
Email to eastbob3@gmail.com