• We just finished moving the forums to a new hosting server. It looks like everything is functioning correctly but if you find a problem please report it in the Forum Technical Support Forum (click here) or email us at forum_moderator AT aawforum.org. Thanks!
  • Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Dave Roberts for "2 Hats" being selected as Turning of the Week for April 22, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Mesquite and Resin Vase
A

Mesquite and Resin Vase

This is a piece I finished last night. It was a twisted wormy piece of mesquite with blue and purple resin. It is about 10+ inches tall and about 7" at the widest point. The finish is a catalyzed varnish wet sanded, buffed and hand rubbed to a high gloss.

As always comments are welcome.

Thanks

Alan
The other reason for pressure is the resin I use sets real fast and vacuum will not work.

The varnish I use is sprayed with a HVLP gun. The smoother it is applied the less likely you are to sand through the finish. So yes it really should be sprayed. This piece has 4 coats of the varnish.

Alan
 

Media information

Category
Member Galleries
Added by
Alan Trout
Date added
View count
5,977
Comment count
11
Rating
0.00 star(s) 0 ratings

Image metadata

Device
Panasonic DMC-ZS1
Aperture
ƒ/3.9
Focal length
9.7 mm
Exposure time
1/30 second(s)
ISO
400
Flash
Off, did not fire
Filename
Hollow_Form_4.jpg
File size
126.3 KB
Date taken
Sat, 09 October 2010 11:50 PM
Dimensions
640px x 480px

Share this media

Back
Top