• We just finished moving the forums to a new hosting server. It looks like everything is functioning correctly but if you find a problem please report it in the Forum Technical Support Forum (click here) or email us at forum_moderator AT aawforum.org. Thanks!
  • Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Dave Roberts for "2 Hats" being selected as Turning of the Week for April 22, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Reverse the locking handle on PM 2014 tail stock?

rkriet

rkriet

Joined
Aug 5, 2006
Messages
38
Likes
280
Location
Corcoran, MN
I have a Powermatic 2014 lathe, and the locking lever for the tail stock is on the back side of the lathe. I find this to be very inconvenient. Will I encounter problems if I disassemble the locking mechanism and reverse the shaft so that the locking lever is in the front side of the lathe?
 
You must log in or register to reply here.
Back
Top