• We just finished moving the forums to a new hosting server. It looks like everything is functioning correctly but if you find a problem please report it in the Forum Technical Support Forum (click here) or email us at forum_moderator AT aawforum.org. Thanks!
  • Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Dave Roberts for "2 Hats" being selected as Turning of the Week for April 22, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Vicmarc VM120 105 mm jaws

Status
Not open for further replies.
Kent Jaffrey

Kent Jaffrey

Joined
Mar 17, 2019
Messages
152
Likes
114
Location
Warrenton, Virginia
This is a little used set of 105mm (4”) jaws for the vm120 chuck. these are the style with no scre holes affecting the jaw profile. This is good for not damaging tenons, but means they don’t open as far as normal so they don’t quite get large enough to cover the lower range of the 5” jaws.

$55 including shipping in continental US.
IMG_2074.jpeg
IMG_2076.jpeg
 
C

Chris Hyde

Joined
Feb 4, 2022
Messages
28
Likes
10
Location
Hollis, NH
Hi Kent , if they are still available I am interested. It’s a gap in my range that would be helpful. I’ll send a pm.
Chris
 
Status
Not open for further replies.
Back
Top