• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Ronald Campbell for "Guardian Penguin" being selected as Turning of the Week for June 10, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
First piercing
Button
Side View Liming Wax
Liming Wax
First piercing
#2092 Australian Coolibah burl from the "Outback" territory....
#2092 Australian Coolibah burl from the "Outback" territory...
Three Sided Box
Jim Hills

First piercing

I was fortunate to be recognized with TOTW for the second piercing project I had done so I wanted to share my first piercing. This one is Bradford Pear finished with tung oil and acrylic paint. The inside is a bit rough since there are two broken bits imbedded in the wood. I learned a lot from making this piece which helped with the second. The piece is about 4" so the piercings were pretty small. I made good use out of a magnifying headband.
Click to expand...
  • Like
Reactions: Russ Braun, Robbie Graham, Tom Gall and 16 others
Jim Hills
Peter, I used the NSK Presto air driven hand-piece for the piercing and a Micro-motor for the rough carving. A lot of detail was done with needle files and rifflers.
 

Media information

Category
Member Galleries
Added by
Jim Hills
Date added
View count
303
Comment count
3
Rating
0.00 star(s) 0 ratings

Image metadata

Device
Apple iPhone 15 Pro Max
Aperture
ƒ/2.8
Focal length
15.7 mm
Exposure time
1/24 second(s)
ISO
1600
Flash
Off, did not fire
Filename
Piercing I.JPG
File size
522.6 KB
Date taken
Tue, 26 March 2024 12:11 AM
Dimensions
1125px x 2000px

Share this media

Back
Top