• December Turning Challenge Winner!
    Congratulations to Wilson Andrews, the winner of the December Turning Challenge, theme: Happy New Year!
    CLICK HERE to see the voting results.
  • January Turning Challenge -- Turn a French Rolling Pin!!

    Click HERE for further details.
  • Turning of the Week --January 17, 2022

    Congratulations to Andy Goldman for "Latest Charity Donation Bowl" being selected as this weeks TOTW! CLICK HERE for full details.

  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Serial 21078 Parts first Design Second
Don Wattenhofer

Serial 21078 Parts first Design Second

Model BWLS1003 Walnut and Birch pie segmented bowl from a board.
The board for this project was an 8 pie segmented board without a hole in the center that I made to see if I could get the points to match in the middle and it resulted in a round about 10.5" (266mm) diameter X 0.78" (20mm). The technique to get a none conical bowl is from a post titled "a bowl from a board does not need to be conical" and I added the staggered joints to hopefully keep the joints from openning up due to wood movement.
Nice job on those points Don; I’ll love to hear if your staggering of this area prevents the typical joint failures common with this design.
 

Media information

Category
Member Galleries
Added by
Don Wattenhofer
Date added
View count
298
Comment count
2
Rating
0.00 star(s) 0 ratings

Image metadata

Device
SONY ILCE-6000
Aperture
ƒ/5.6
Focal length
48.0 mm
Exposure time
1/160 second(s)
ISO
800
Flash
Auto, did not fire
Filename
21078BowlSeg.JPG
File size
999.6 KB
Date taken
Sun, 10 October 2021 3:41 PM
Dimensions
3346px x 2213px

Share this media

Top