• May 2025 Turning Challenge: Long Neck Hollowform! (click here for details)
  • Congratulations to Phil Hamel winner of the April 2025 Turning Challenge (click here for details)
  • Congratulations to Paul Hedman and Donna Banfield for "Fire and Ice" being selected as Turning of the Week for 5 May, 2025 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

3/4" Thompson Radius Skew

Status
Not open for further replies.
A

Angelo

President Emeritus
Joined
Jun 14, 2004
Messages
417
Likes
170
Location
Lancaster, Pennsylvania
Website
www.majicbrand.com
The blade is approx. 8" long. The tang measures roughly 2" it is 3/4" wide by 5/16" thick. It's a nice heavy skew in the Traditional Thompsom fashion. The edge at the short point is rounded so as to slip nicely across the tools rest.
The handle is unfinished ash approx. 15" long. It is a used handle and the old mounting hole has been plugged and glued with a maple dowel. I can mount it into the handle or send it for you to mount, your choice.
Have two was planning to sell both but I like it too much, so I keep one.
Asking $40 plus USPS to anywhere USA
 

Attachments

  • 3-4 Thompson Skew.jpg
    3-4 Thompson Skew.jpg
    57.5 KB · Views: 63
Angelo said:
The blade is approx. 8" long. The tang measures roughly 2" it is 3/4" wide by 5/16" thick. It's a nice heavy skew in the Traditional Thompsom fashion. The edge at the short point is rounded so as to slip nicely across the tools rest.
The handle is unfinished ash approx. 15" long. It is a used handle and the old mounting hole has been plugged and glued with a maple dowel. I can mount it into the handle or send it for you to mount, your choice.
Have two was planning to sell both but I like it too much, so I keep one.
Asking $40 plus USPS to anywhere USA
Click to expand...
PM sent
 
Status
Not open for further replies.
Back
Top