• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • February 2026 Turning Challenge: Cookie Jar! (click here for details)
  • Congratulations to Chad Eames for "Red Tines" being selected as Turning of the Week for February 23, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

A new trick?

R

robo hippy

Joined
Aug 14, 2007
Messages
6,690
Likes
3,844
Location
Eugene, OR
I do watch too much You Tube. Anyway. I have seen a couple of turners use this trick, tried it and liked it. The turner, to mark out a tenon or recess would use the dividers. like I always do, but they would make the divider to be the radius rather than the diameter. This means you cut the measure in half, and then one point goes dead center, and the other point marks the line. No more worrying about touching the other edge into the up moving other side of the spinning bowl. It works really well! No idea who first thought of this.

robo hippy
 
Reed, those were my thoughts and cautions...divide the diameter in half. Put one point in the area (not on) of the center and the other to mark the outer edge of the tenon. I have a compass that has a pencil and sharp point on one end. I use this to mark tenons; turn the headstock by hand.
 
You must log in or register to reply here.
Back
Top