Would someone measure and reply with the center-to-center spacing on the two set screws in a D-Way handle? I assume that all of the D-Way handles use the same spacing but the one I am particularly interested in is the 8 inch.
-
Congratulations to David Bartell, People's Choice in the March 2026 Turning Challenge (click here for details) -
Congratulations to Chris Lawrence for "Dragon's Grip" being selected as Turning of the Week for March 30, 2026 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
A question on D-Way handles
- Thread starter Jesse Tutterrow
- Start date
-
- Tags
- d-way tool handle
- Joined
- Jan 27, 2005
- Messages
- 13,225
- Likes
- 5,853
- Location
- Dalworthington Gardens, TX
- Website
- pbase.com
The distance appears to be about 1½".
- Joined
- Aug 31, 2006
- Messages
- 347
- Likes
- 142
- Location
- Montgomery, TX
- Website
- www.gulfcoastwoodturners.org
Go to the source. Call D-Way. Ask him. - John
I just checked my 8 inch handle and it's 1 1/4".