• Congratulations to Rick Moreton, People's Choice in the July 2025 Turning Challenge (click here for details)
  • Congratulations to Michael Foster for "Costa II" being selected as Turning of the Week for July 28th, 2025 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Abrasive Paste

I could not see the reasoning for it - considering how little paste may be used at a time, I'd imagine the oil would cure relatively quickly in the jar, so not much sense in making a big batch . I suppose one could make a very small one-time-use batch but for the effort involved to get the results needed, I think it would be a huge waste of time.
 
I made a batch from a Mike Peace video. works very well and after a year and a half in the container, the oil did not go bad, or cure inside the container. I used mineral oil, beeswax, and diatomaceous earth. It works just as well as the commercial stuff. I believe Kim Tippen has a couple different videos on making it also.

View: https://youtu.be/htqbC3AZ7qg
 
I have seen mention of a technique using walnut oil, wax, and 4F pumice (or without the wax I would think). You load up a cloth with the three ingredients for single use.
 
You must log in or register to reply here.
Back
Top