• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • Congratulations to Chris Lawrence for "Dragon's Grip" being selected as Turning of the Week for March 30, 2026 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Additional Lathe Lighting

Chris Edwards

Chris Edwards

Joined
Mar 1, 2020
Messages
90
Likes
86
Location
Lebanon, TN
Built this little add on, so wherever I park my lathe for use, I have good overhead lighting.

I can rotate the arm so the light can be positioned directly above the spindle to about 8 inches closer to me, so it illuminates the business side better.

I can remove it with two knobs.

The LED light is very lightweight, otherwise I would probably have to bade beefed up the support.


https://www.amazon.com/Feit-73991-4...p+Light,+48-Inch,+4100K&qid=1603838605&sr=8-1
 
Chris Edwards said:
Built this little add on, so wherever I park my lathe for use, I have good overhead lighting.

I can rotate the arm so the light can be positioned directly above the spindle to about 8 inches closer to me, so it illuminates the business side better.

I can remove it with two knobs.

The LED light is very lightweight, otherwise I would probably have to bade beefed up the support.


https://www.amazon.com/Feit-73991-4-Feet-Light-48-Inch/dp/B00MJUCU2A/ref=sr_1_1?dchild=1&keywords=Feit+73991+2+Lamp+4-Feet+LED+Shop+Light,+48-Inch,+4100K&qid=1603838605&sr=8-1
Click to expand...
I did the exact same thing. I love those led double tube lights.
 
You must log in or register to reply here.
Back
Top