A couple days ago I rough-turned a sycamore blank that had wonderful red streaks in it and then put it in an alcohol bath to speed drying. When I took the rough bowl out of the alcohol and re-turned it, the color was gone. Has anyone else had this experience, or did I hallucinate the vivid reds in the original blank? (Note: it was denatured alcohol, and I didn't even sniff it. Much.)
-
Congratulations to Bernie Hyrtzak, People's Choice in the January 2026 Turning Challenge (click here for details) -
Congratulations to David Croxton for "Geri's Basket Illusion" being selected as Turning of the Week for February 2, 2026 (click here for details) -
AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
-
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
alcohol bleaching?
- Thread starter Michael Kuehl
- Start date
- Joined
- May 16, 2005
- Messages
- 3,540
- Likes
- 22
Doubt the alcohol had anything to do with it. Bleaching is normally an oxidation process, so my bet would be on the atmosphere, not hydroxl radicals.
Either that, or the red was some organic dye more soluble in the less polar alcohol, in which case you should discover it again below the surface of the wood. A day in a soak isn't going to get much penetration even when you've thrown all that water away centrifugally to make room for air. Won't make it dry any faster or safer, either.
Either that, or the red was some organic dye more soluble in the less polar alcohol, in which case you should discover it again below the surface of the wood. A day in a soak isn't going to get much penetration even when you've thrown all that water away centrifugally to make room for air. Won't make it dry any faster or safer, either.