For those who use Osmo, do you have any experience of this coating on non-wood surfaces? I frequently have filled cracks or inlay on my pieces, and am wondering if Osmo will work. .
-
November 2025 Turning Challenge: Wall Hanging! (click here for details) -
Congratulations to Craig Morton, People's Choice in the October 2025 Turning Challenge (click here for details) -
Congratulations to Andy Chen for "Mesquite Vase with Polymer Clay Millefiori" being selected as Turning of the Week for November 3, 2025 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Another question on Osmo
- Thread starter Michael Nathal
- Start date
Good question. i've had an interest in Osmo too and hadn't thought of that. Interested to see any feedback
A piece I did recently with Osmo also had a large defect filled with epoxy. The epoxy and Osmo seem fine. I don't know how much of a film the Osmo made over the epoxy surface, but it didn't bead up, smear or otherwise look "different". The epoxy was reasonably shiny, but the whole surface had been sanded to p1200.
Remember osmo is part oils and part waxes. The oils will not penetrate epoxy, nothing will. But after oils have dried, etc, the waxes will remain and will buff up nicely.