• It's time to cast your vote in the January 2026 Turning Challenge. (click here for details)
  • Congratulations to Ric Taylor for "Black Ash Burl" being selected as Turning of the Week for January 26, 2026 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Anti-vibration gloves or tool handle coverings?

C

Chuck Engstrom

Joined
May 12, 2004
Messages
37
Likes
25
Have any of you found anti-vibration gloves and/or tool handle wrappings or coverings that offer significant reduction of the vibrations transmitted into our hands and forearms as we turn? At 82 I'm finding that I can't stay confidently on the lathe as long as I used to, and I'm hardly surprised. But I'd like to find whatever I can that would diminish the sort of tingling sensations that develop and make me feel that fine tool control is on the verge of being compromised.
Thanks for your suggestions.
 
I sold anti-vibration gloves to a truck driver who was experiencing hand problems with the vibrations of the steering wheel. I worked at Fastenal at the time. Check with them.
 
Last year, I was having problems with arthritis in both hands. Complained to the doc about it (pretty much knowing that not much can be done), but....he sent me to a Occupational Therapist . I went for six visits....got lessons on things that I could do to help my hands. Exercises, heat, stretching, etc. Well worth the time and effort. It helped a bunch. Did not cure the whole problem...but did help. Might be worth your time and effort.

I find that when I run the chainsaw for a long time (hours) and when I use the gas weed whacker, I get the tingling. I use gloves with padding and it helps. But, I found the best thing was to limit my time doing the work. I do not get the Carpel tunnel problems working on the lathe.
Good luck. Keep at it.
 
I have a couple of JohnJordan foam-wrapped handles, not sure if anyone makes an equivalent. Look into soft bicycle bar wrap for tool handles and/or padded fingerless bike gloves. Gloves around lathes can be hazardous. I do wear fingerless gloves in the shop as otherwise my hands are unbearably cold, but it is a liability.
 
An inexpensive wrap for your toolhandles is "vet wrap". Just do a search for that and you'll get a bunch of hits. There are different colors you can use to identify different tool types if you wish. It's self-adhesive. You can add as many layers as you want, and it's easy to remove.
 
Cinelli, an Italian bicycle manufacturer, has made some of the best handlebar tape for 40 years. I've used it on bicycles many times. You'll need to terminate the ends of the wrap with a couple wraps of electrical tape. A bunch of colors are found at Amazon. Youtube can assist with getting a successful wrap.

This tape has a slightly thicker middle 1/3 zone along its length as padding. A good wrap puts the edge of the next turn of wrap just to the edge of that thicker middle zone. This will create a fairly even grip surface and minimize the "hills and valleys" of the tape. Pull each wrap moderately firm, enough to keep it securely in place, but the tape should not be stretching. Pull firm enough to just before visibly causing the tape to stretch. This bar tape may have a wax paper release strip on the back side, covering a lightly adhesive strip that aids in keeping the bar tape in place. That adhesive strip should be on your tool handle and not on the underlapped wrap.
 
Last edited:
Well, I know they make a lot of different "handle wraps" for golf clubs, hockey sticks, and bicycle handles. I am sure there are others. Probably any big box hardware store would have something that would work. My first thought was about how do you grip the tool? For sure, if you have a death grip on it, it will wear you out much more quickly. Longer handles help, mostly for better leverage. If you are turning bowls and have a sliding headstock, slide the headstock down to the tailstock end which will allow you to stand up straight, and have a better grip on your tools. Same with a pivoting headstock, use that feature.

robo hippy
 
Most of my large hollowing tools have a foam handle around 32mm in dia and about 6mm thick they are readily available in your neck of the woods. Also I have used the bicycle wraps fixing the ends securely can be challenging. I use short finger gloves, but Ilike your suggestion Richard palm gel fingerless cycling gloves, thanks.
 
You must log in or register to reply here.
Back
Top