• Congratulations to Bernie Hyrtzak, People's Choice in the January 2026 Turning Challenge (click here for details)
  • Congratulations to David Croxton for "Geri's Basket Illusion" being selected as Turning of the Week for February 2, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Anyone have experience with rhododendron?

D

Dave Smith

Joined
Dec 29, 2004
Messages
67
Likes
0
Location
Longview, WA
Website
www.woodnheart.com
A neighbor dropped off some large pieces of rhododendron this afternoon. The pieces are upwards of 8" in diameter. Unfortunately he cut the plant last week and just thought of me today. A considerable amount of wood was lost due to cracking on the exposed ends. I am processing what I can save. There are a couple of bowls soaking this evening that were turned from a large crotch. He also left a piece of wood that he said was from a shrub that has white leaves. That really narrows it down. It is twisted like a wisteria or grape vine. At about 4" in diameter and a foot long I hope to get something out of it.

The bowls turned so far are 7" in diameter and were taken to 1/2" and 3/8" in thickness. It won't take too long to find out if that was a bad idea. I reckon that by the weekend the bowls will be potato chips, split kindling, or about ready to turn. The wood is light in color but shows some indication of grain variation. Can I expect the color to darken when it is dry and exposed to light?

Dave Smith

Collector of odd wood in Longview, WA.
 
Rhody woes

Dave, I have a stack of Rhody; here's what I've learned: 1. When you get the wood coat the end grain heavily w/Anchor seal or similar. 2. Leave it alone until the moisture content is no more than 10%. 3. I've not had any luck w/rough-turning, the pieces always crack. Therefore, I turn only "dry" rhody.
4. Do not try very thin-wall turning, they'll split for sure. 5. Don't get the wood hot while sanding=split.

The stuff is more touchy than madrona. It's a pain but pretty.
 
Last edited:
You must log in or register to reply here.
Back
Top