Bad vapors off finishing products

[John Torchick]

I have a number of products as WOP, Mylands Sanding Sealer, to name a few that have warnings about harmful vapors/fumes. My shop is enclosed with no outside venting. Has one window but the house has settled over the years and is jammed shut. Only way would be to go outside but at the mercy of the weather. Your thoughts?

 

[John K Jordan]

Besides wearing a respirator with cartridges for volitiles, could you put an in-wall fan to the outside? A friend of mine did that - it has louvers. His is large, but I see various sizes for sale on Amazon and elsewhere.

When I worked at a large woodworking facility they had a separate finish room that exhausted fumes to the outside. I've read of some people who have small finishing tents inside the shop. Perhaps a larger one could be set up outside as needed.

I wonder if it's possible to make a finishing booth or tent for inside the shop with an exhaust fan with filters that would remove harmful fumes before returning air to the shop.

When spraying chemicals at the farm I use an industrial 3M full-face respirator with cartridge filters. Would probably work for finishes too. This one shows P100 filters for dust but they twist off and the cartridges for chemicals twist on.



JKJ

 

[Dave Landers]

I've got a small spray booth. It doesn't hold big things, but is enough for most of my work. It does fold up so I can just set it up when needed. It vents out a hose you can stick thru a partially open (about 2") window. I stick it out the bottom of the garage door. Not great if it's below 10ºF or whatever, but those aren't finishing days anyway for me. It would require you to fix your window, but there might be other benefits to that Anyway, this is the booth I have:

https://www.amazon.com/dp/B0BTTH4WNL?th=1

It does ok with vapors from wipe-on and brushed finishes, and should be ok if used as designed (for small airbrush projects). But it's a bit underpowered for how I airbrush lacquer. Still vents, just not quite enough. So I also wear a respirator with vapor (not dust) rated filters. And do my finishing at the end of the day so I can leave the shop right after.

Since you don't have a window... I have seen a YouTube video or two of someone making a water filter - basically they took a spray booth like the one above and blew the exhaust into a bucket of water. Not sure how effective that would be...
Not sure if this is one of the videos I saw, but here's one:

View: https://youtu.be/4HWM3dJ8ESc?si=Ni517JYjlGYStY2-

 

[John Torchick]

To vent outside would entail removing one pane of double glass in the window that won't open. Plus going through a block wall in the front of the house wouldn't be attractive. As for respirator, I have one but can't wear it as it throws my glasses out of focus and get lightheaded and severe headaches. Need glasses to see what I'm doing.