Want to add a second banjo to my Jet1642 for doing large tall hollow forms. I like what I read about the Oneway banjo so hoping someone has one, or something that will work, that will fit my lathe.
-
It's time to cast your vote in the April 2025 Turning Challenge. (click here for details) -
Congratulations to Steve Bonny for "A Book Holds What Time Lets Go" being selected as Turning of the Week for 28 April, 2025 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Banjo to fit Jet1642
- Thread starter Randy Anderson
- Start date
- Status
Hey Randy, just a thought, but are your present tool rest posts the right length for a Oneway?
Is there a max/min length they require? The Jet banjo has the locking arm under the tool rest post hole so I've had to cut other tool rests to the right length to be able to fit. I don't see anything in the specs about tool rest post length.
I don't know, but I'm sure you could ask Oneway.
The ONEWAY 1640 Banjo is 5 1/2" tall. The tool rest post depth is 1 1/8" above the lathe bed. The tool post lock is about 1/2" wide and the top is 1 1/8" below the top surface of the casting.
Hello @Randy Anderson,
We are closing this post as it has been inactive for 30 days. Thank you from the AAW Forum Bot!
We are closing this post as it has been inactive for 30 days. Thank you from the AAW Forum Bot!
- Status