• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • Congratulations to Bernie Hyrtzak, People's Choice in the January 2026 Turning Challenge (click here for details)
  • Congratulations to David Croxton for "Geri's Basket Illusion" being selected as Turning of the Week for February 2, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Black Stain in Magnolia

Joined
Oct 6, 2008
Messages
402
Likes
270
Location
North Charleston, SC
I recently finished turned a Magnolia bowl which had been coated with Anchor Seal and air dried for 5 months. It has a black stain through the center which I assume is a mold or fungi. Any suggestions on removing it or preventing stains in future bowls?
 
I have no idea what might be your cause...was it in the pith area? Last week I bucked up some storm damaged magnolia at my mother in law's. The center pith area was black...where it existed. But most of the pith had long since rotted away. I am not sure if that was unique to the damaged limbs, or is common with magnolia. I will be eager to see what others might say.
 
magnolia

Paul,
A friend of mine brought me a piece of magnolia,not a very big log, and I rough turned it and found dark stains throughout. The wood is really light and I personally did not like the looks. I tried keeping the pith in it for the piece was so small but It didn't hold very well. I also checked a bit even after I dried it.
Maybe if I had a much larger piece that I could avoid the center it would have been better . I find there are so many more varities of wood that I have access to that I choose not to use it. Gary
 
I have turned and sawn into boards a lot of Magnolia. The only time I found any black was when the tree was diseased. It usually smells bad too.
I put AnchorSeal on the end grain of bowls before they go into a paper bag. They never have come out black in the center.
 
Back
Top