• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • February 2026 Turning Challenge: Cookie Jar! (click here for details)
  • Congratulations to Matt Carvalho for "Red Mallee Folded Form" being selected as Turning of the Week for February 9, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Boric Acid to Treat for Bugs??

C

Charles Johnson

Joined
Dec 8, 2010
Messages
9
Likes
0
Location
Western North Carolina
I was recently given some very nice cherry logs that unfortunately turned out to have powder post beetles in them. I would like to treat the cut up blanks to kill the little buggers, rather than let them chew up/ruin the wood and, much worse, be invited into my shop. A while ago, a termite inspector suggested spraying with bifenthrin, but that's nasty stuff and I wouldn't want to turn such treated wood into small shavings and sawdust all over myself.

Boric acid was an alternative suggested by the local ag extension officer. Seems much more promising, either as disodium octaborate tetrahydrate in Bora-Care (fairly expensive at $70 to $120 for a gallon jug) or boric acid powder ($15 for a 5# bag).

Does anyone have experience with either of these products? One issue is effectiveness; the more important one is health safety. Any other ideas? I'll adopt whatever program for all incoming raw wood. Many thanks.
 
heavy duty trash bag hooked up to car exhaust
 
I've heard that many times but have yet to try it. Putting the suspect wood in a plastic bag with moth balls works. I good friend tried it and had great success.
 
I use borate rods in posts that go straight into the ground, and they clearly kill bugs, because I find dead bugs near where the rods are inserted. All the info suggests that you shouldn't touch borate rods with bare hands, so while borates are fairly green, I can't imagine the wood could be considered food grade after use.
Carbon dioxide seems like a great idea, or possibly freezing long term. I wonder about soaking/ponding in salty water for a while.
 
Powder post beetles are active only about two or three weeks per year. That leaves a long dormancy to treat the wood. Microwave useable pieces, treat with boric acid, or heat them up to the point that the eggs are killed.

If you can arrange a sort of kiln, powder post beetles are very suceptible to heat. 120 degrees f for over 30 minutes does them in. A solar kiln, ought to reach that temperature..
 
You must log in or register to reply here.
Back
Top