Has anyone used the Bosch PS10-2 articulating head drill/driver for power sanding? At 2.2 pounds and 5 positions from 180 to 90 degrees of articulation, it looks like it might be good. Any experience out there?
-
July 2025 Turning Challenge: Turn a Multi-axis Weed Pot! (click here for details) -
Congratulations to Kent Reisdorph for "Sugarberry Bowl" being selected as Turning of the Week for July 14, 2025 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Bosch PS10-2 for power sanding?
- Thread starter mlchapman
- Start date
mlchapman said:
1. Much too slow. Top RPM is 600.
2. The trigger is too close to the head. Good for driving screws in close quarters, but it puts your digit in the line of fire when sanding and would make things iffy getting into deep bowls and such.
2 cents, 1 opinion and done
m