-
Congratulations to Bernie Hyrtzak, People's Choice in the January 2026 Turning Challenge (click here for details) -
Congratulations to David Croxton for "Geri's Basket Illusion" being selected as Turning of the Week for February 2, 2026 (click here for details) -
AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
-
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Burning wood
- Thread starter squirrel
- Start date
I haven’t seen any extensive writing on the topic but I have done some myself. It isn’t had to figure out. Grab whatever heating or burnig devices you have around the shop or house and have at a spare piece of wood. What you’ll quickly discover is that different woods burn differently. Different devices or torches burn at different temperatures and create quite varied results.
I like burning good hard open porous wood. Oak, ash, hickory all work well. Sycamore burns well too. You can apply more heat to these harder woods and get a blacker surface. The softer woods seem to be a little touchier. Wire brushing, sanding, scraping and other surface treatments after burning can result in very interesting textures. Applying shellac or lacquer over these burned surfaces can produce a deeper and richer black than any dye or paint can.
Propane torch works; MAP gas is hotter as is butane. Little butane pencil torches are fun for small items or painting patterns on larger surfaces. Heated items can be pressed against the surface of wood or just dropped into open forms and tumbled around. Mud and paint can be used a resists to the flame and sanded or scraped away after. There are tons of things to play with. Just get some wood and some flames and play. Within a half hour you’ll know more than any book can offer and have a direction to go in
- Scott
I like burning good hard open porous wood. Oak, ash, hickory all work well. Sycamore burns well too. You can apply more heat to these harder woods and get a blacker surface. The softer woods seem to be a little touchier. Wire brushing, sanding, scraping and other surface treatments after burning can result in very interesting textures. Applying shellac or lacquer over these burned surfaces can produce a deeper and richer black than any dye or paint can.
Propane torch works; MAP gas is hotter as is butane. Little butane pencil torches are fun for small items or painting patterns on larger surfaces. Heated items can be pressed against the surface of wood or just dropped into open forms and tumbled around. Mud and paint can be used a resists to the flame and sanded or scraped away after. There are tons of things to play with. Just get some wood and some flames and play. Within a half hour you’ll know more than any book can offer and have a direction to go in
- Scott
Just to be sure, best to do this outdoors. I put my pieces on top of the BBQ and burn away.
Burt
Burt