I have been watching a lot of Richard Raffan and he often uses what he refers to as shark jaws which are very versatile. I have searched most of the chuck manufacturers and can't find that type jaw. All of my chucks and jaws are Nova.I have searched their website and also Record Power as I understand will they fit Nova Chucks also. Any suggestions from the forum.
-
Congratulations to John K. Jordan winner of the June 2025 Turning Challenge (click here for details) -
Congratulations to John Shannon"Cherry Bowl" being selected as Turning of the Week for June 30 2025 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Chuck Jaw help
- Thread starter Frank Calzaretta
- Start date
A picture of the jaws you want would really help. You can pause the video and do a screenshot.
- Joined
- Apr 27, 2004
- Messages
- 9,227
- Likes
- 5,868
- Location
- Lakeland, Florida
- Website
- www.hockenberywoodturning.com
This is a link to the vicmarc shark jaws. They are tall serrated jaws with a dovetail at the top.
You might find similar jaws with other manufacturers called tower jaws. ONEWAY has a series of these
Vicmarc VM120/150 Shark Jaws - 130mm
Check out the deal on Vicmarc VM120/150 Shark Jaws - 130mm at Packard Woodworks: The Woodturner's Source
www.packardwoodworks.com
I have these mounted on a Nova G3. They work great.
Thanks I'll check it out
ThanksThis is a link to the vicmarc shark jaws. They are tall serrated jaws with a dovetail at the top.
You might find similar jaws with other manufacturers called tower jaws. ONEWAY has a series of these
Vicmarc VM120/150 Shark Jaws - 130mm
Check out the deal on Vicmarc VM120/150 Shark Jaws - 130mm at Packard Woodworks: The Woodturner's Sourcewww.packardwoodworks.com
These are the Teknatool Nova internally "serrated" jaws I use the most. Grip squares and rounds, mostly for various spindle turnings.
They have dovetails on the outside, unlike the Nova Greenwood jaw set.
JKJ
They have dovetails on the outside, unlike the Nova Greenwood jaw set.
JKJ
I have very similar ones to numbers two and three in your picture, very useful. They are supplied by a company over here called Charnwood and fit Record Power and Nova Chucks.
Edit: I’ve just looked at a RR YouTube video and he calls these Shark Jaws and they’re mounted on a Vicmarc 100 Chuck.
I’ve seen these called Ripple Jaws by other companies.
Last edited:
As far as I can tell Nova and Record Power don’t make this type of Accessory Jaw? Over here in the UK, Charnwood sell these which fit Nova chucks.
