-
July 2025 Turning Challenge: Turn a Multi-axis Weed Pot! (click here for details) -
Congratulations to Bobby McCarly for "Hemostatmorphodon" being selected as Turning of the Week for July 7, 2025 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Cleaner for MT?
- Thread starter Doghouse
- Start date
packard or craft supplies have them
they are green --- they work ... come in differrent sizes
see below for the minor details (like the item name and description)
they are green --- they work ... come in differrent sizes
see below for the minor details (like the item name and description)
Last edited:
DH,
Packhard sells the urethane "Tapermate" which I use every time I use the headstock taper. I also pop the live center and clean the tailstock taper every so often. Don't forget to clean off the male side of the equations as well; dirt or grit on those will screw things up just as well.
Mark Mandell
Packhard sells the urethane "Tapermate" which I use every time I use the headstock taper. I also pop the live center and clean the tailstock taper every so often. Don't forget to clean off the male side of the equations as well; dirt or grit on those will screw things up just as well.
Mark Mandell
Steve Worcester
Admin Emeritus
A reamer would only be needed if there is scarring (as it is a cutting tool). The tapermate would do a fine job of cleaning the "gunk" out. Wood shavings, glue goo, etc.