• We just finished moving the forums to a new hosting server. It looks like everything is functioning correctly but if you find a problem please report it in the Forum Technical Support Forum (click here) or email us at forum_moderator AT aawforum.org. Thanks!
  • Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Dave Roberts for "2 Hats" being selected as Turning of the Week for April 22, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Duplicator $50

Status
Not open for further replies.
Aaron Cheateaux

Aaron Cheateaux

Joined
Jan 17, 2020
Messages
119
Likes
97
Location
Steilacoom, WA
Contact here please.

I picked this up with a huge tool lot I bought local. It’s been sitting in my shop for a year and I’ve never unwrapped until I needed a picture. Not sure of the make/brand, it’s 20” across near the mounting holes. $50 OBO plus shipping from Steilacoom WA.
4A274C20-2201-43F4-8AD5-75498B96A23F.jpeg
 
Aaron Cheateaux

Aaron Cheateaux

Joined
Jan 17, 2020
Messages
119
Likes
97
Location
Steilacoom, WA
Good eye. Layout wise it looks pretty close to this one

www.pennstateind.com

Jet Duplicator w/ DVD

Jet Duplicator w/ DVDFor JET, DELTA, TCLPRO & TCLPROVS lathes. Automate the difficult and tedious job of duplicating complex and repetitive turnings. Easily mounts and unmounts from your lathe. Duplicate from pattern or 3-D originals up to 10 long. Depth of cut 1. Included HSS cutter is groun
www.pennstateind.com
 
B

Brian Gustin

Joined
Feb 28, 2021
Messages
1,226
Likes
1,075
Location
Roulette, PA
Website
www.reallyruralwoodworks.com
I'd do 50 bucks shipped, if that works for you. I don't know as I'd be able to use it for very much, but may be handy for some flatwork projects when I want to turn more than a few drawer knobs. I was intending to build a DIY duplicator for larger spindles (2-3 inch cut depth, 30 inch length) so it may also serve as a model if it works how I'd like it to.
 
Status
Not open for further replies.
Back
Top