• Congratulations to Phil Hamel winner of the April 2025 Turning Challenge (click here for details)
  • Congratulations to Steve Bonny for "A Book Holds What Time Lets Go" being selected as Turning of the Week for 28 April, 2025 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Eddie Kish

E

Edward Kish

Joined
Apr 28, 2019
Messages
3
Likes
1
Location
Wolcott, VT
Hi all, just joined up a few days ago. I've been woodworking for most of my life, but picked up my first lathe a few months ago. Pretty basic four speed craftsman, 3/4 threaded headstock etc. Really been enjoying turning and looking forward to learning more! This is also my first time joining a forum in years after spending a great deal of time on them in the past. Great to be here! I'll throw up some pictures of my projects so far. I live in Northern VT where my family owns lots of land with plenty of maple and oak, although I'm finding it difficult to wait for fresh wood to dry enough to turn this early in the game :).
20190503_133629.jpg 20190503_1338281.jpg 20190407_212043.jpg 57716519_399078410822765_4830869916213051392_o.jpg
 
Hi Eddie, and welcome! You'll find this a very friendly place. And I can tell from your work that you're already getting comfortable with that lathe. Like you, I did mostly flat work for about 35 years before getting interested in turning a few years ago.

I took a few classes and shopped around for a club. If you have a club in your area (and I'll bet you do), you may want to think about joining. Anyway, welcome to the forum!

Mark
 
Eddie,

Looks like you are having fun with your new lathe, there are several methods you can use to speed up the process of drying green wood. If you are turning bowls you want to rough turn them when they are green and then return them after the piece has dried. The smaller the wood piece the quicker it will dry, so you might want to process some wood into smaller billets, and process some larger pieces that you set aside for turning in a few years.

Looks like you have a liking for spalted wood pieces, there are several methods you can use to spalt green logs that will produce the spalting. There are a number of articles and books that have been written about the process, you can also purchase the spalting fungi spores to inoculate green logs, but if you have processed your own spaled wood you can mix the wood chips into the soil and set your green logs on top and keep the soil moist to start the spalting spores into the green log.
 
I like spalted wood as much as the next guy, honestly I just have a lot of firewood that was stored in a somewhat moist basement and so pretty much every piece of maple is spalted. Terrible to work with, though. The large mallet was supposed to be functional, but then looked too pretty and the soft, punky wood wasn't going to hold up long to lots of saying
 
Eddie,

There are several options for spalted wood that get punky, you can dry and stabilize the wood with a resin and then turn it. Many of the pen blanks sold today are stabilized using this process. Some woodturners will spalt the wood and stop the process to maintain a viable wood that is solid but still exhibits the fungal staining of the wood layers. You can microwave the wood to kill the fungal growth or some woodworkers will heat or boil the wood to kill the fungal spores.
 
Thanks for the advice guys! I've turned some REALLY green wood (had a branch come down and turned it a few weeks later, i almost had to change my shirt it sprayed so much water at me!), but look forward about learning more about the right ways to do it to avoid splitting etc. I do love the idea of turning and letting it warp
 
Welcome to the forum. Joining AAW and a local chapter would be a good move. Did it and never regretted it. As f or drying, some make a DIY kiln out of an old refrigerator or dishwasher. Also, I have seen plans for a solar kiln.
 
Hey Edward, if that spalted maple becomes a bit of a problem, I'll bet some on this forum just might be willing to purchase some of it.

Hope that doesn't sound crass.
 
You must log in or register to reply here.
Back
Top