• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • February 2026 Turning Challenge: Cookie Jar! (click here for details)
  • Congratulations to Matt Carvalho for "Red Mallee Folded Form" being selected as Turning of the Week for February 9, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Exotic wood ID

Michael Nathal

Michael Nathal

Joined
Jul 5, 2015
Messages
411
Likes
4,020
Location
Strongsville, Ohio
I obtained an unlabeled exotic wood blank from a club member's estate. It apparently sat in his garage for over 30 years. When I turned it, the wood did not produce any shavings, just sawdust. The wood was not particularly hard but was very heavy, heavier than cocobolo. It is tight grained, and when freshly cut the color was primarily orange, relatively close to cherry, with a hint of green tint in places. But I put it out in the sun for a couple hours, and it turned a dark brown, at least as dark as walnut. I didn't get a chance to take photos before it turned brown.

Any suggestions to what I have?
 
I bought a piece of "rosewood" that was not identified any further than that. The block was black, but the brownish red color was revealed once cut. I have suspicions the wax preservative coating had something to do with it turning black.....but ???.

This is the finished bowl. Some of the blackish color is from the staining at the surface of the block.

Could it be this is what you have?

-----odie-----
1450 rosewood (3).JPG
 
Thanks for venturing some guesses. I know a photo would help but the wood is too dark to see much grain pattern. It is definitely not Osage Orange, which is more ring-porous and very yellow when freshly cut. It is possibly a rosewood, but I never had any wood that changed color so rapidly. I have put cherry, cocobolo and osage orange in sunlight but they darkened only slightly after many days of exposure. This piece looks almost like ebony after 2 hours.
 
Paduk?
Not sure how fast it would change color.
It is one of those woods that to me looks great through the color changes.

Starts out on the orange side of red, becomes a black cherry sort of red then almost black
I used it a lot on Christmas ornamame finials.
Always looked good to me when paired with light colored globe.
 
You must log in or register to reply here.
Back
Top