-
Congratulations to Phil Hamel winner of the April 2025 Turning Challenge (click here for details) -
Congratulations to Paul Hedman and Donna Banfield for "Fire and Ice" being selected as Turning of the Week for 5 May, 2025 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
First lathe
- Thread starter Webb Willmott
- Start date
My Dad's 1948 10ER Shop Smith that I inherited.
I did a lot of "scrape and sand" turnings on that rig.
Photo taken in 1973
I did a lot of "scrape and sand" turnings on that rig.
Photo taken in 1973
The old Harbor Freight mini lathe with the genuine HF "Professional" HSS gouges (still use them). A decent chuck, grinder, and wolverine jig probably cost more than the lathe and tools combined. I still think it is a good enough machine to start with but wish the minimum speed was slower. It would have helped with multi axis turning.
Don't have a picture of it but my first one was my dad's and it was a craftsman two pipe with the nail point for a live center, you had to oil the center to make it live. He had the 5 piece set of tools from craftsman with it which were tool steel and I still use them. Lathe is long gone.
Same, an old Taiwanese lathe with 6" throw all cast iron, no chucks in those days, just a face plate. It was sold about 40 years ago
Dave Landers
Beta Tester
My first lathe was home-made. Plans were in the April 1987 issue of Wood magazine. Used it for like 20 years. Don't have a pic of it setup, but here's me working on it.
Baltic Birch plywood bed ways, laminated hard maple head/tail stock, particle board base. Wrote away to somewhere for the spindles (listed in the back of the magazine). Motor and pulleys from a surplus catalog...
Don't have it anymore, but some of the pieces have been repurposed and so some of it's still around.
Actually technically this was my second lathe - I inherited a small bench-top metal lathe (Delta or Rockwell or Craftsman - can't remember). Had to sell it to get the money to build the wooden wood lathe.
Baltic Birch plywood bed ways, laminated hard maple head/tail stock, particle board base. Wrote away to somewhere for the spindles (listed in the back of the magazine). Motor and pulleys from a surplus catalog...
Don't have it anymore, but some of the pieces have been repurposed and so some of it's still around.
Actually technically this was my second lathe - I inherited a small bench-top metal lathe (Delta or Rockwell or Craftsman - can't remember). Had to sell it to get the money to build the wooden wood lathe.
Can’t remember the maker but my dad had bought a whole garage set of tools. Sight unseen. In in was a lathe he had no use for. It went to storage under the porch. Out of the rain but exposed to the elements. Years later I decide I want to make my own turkey calls. If only I had a lathe! Drag it out and plug it up and it worked until I sold it. It was Cast bed with a 3/4” spindle. Replaced with a craftsman garage find.
I sold a big piece of furniture the first day of a show, and thought it was time for a new toy. I went to a turner at the show and asked him if he knew of any lathes for sale. He said he had one he was going to put in the paper the next day, so I bought it. A 4 speed Atlas. First thing I did was replace the 1/2 hp motor with a 1 horse motor. Built the stand out of 2 sections of laminated beam, about 4 inches thick, with one section being a lower shelf. Some link belt for the drive and away I went. Best Christmas present I ever bought myself! I upgraded to a 3520A in about 2 years. The rest is history....
robo hippy
robo hippy