• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • February 2026 Turning Challenge: Cookie Jar! (click here for details)
  • Congratulations to Matt Carvalho for "Red Mallee Folded Form" being selected as Turning of the Week for February 9, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

First real turning

John Torchick

John Torchick

Joined
Jan 24, 2010
Messages
3,193
Likes
970
Location
Cleveland, Tennessee
Finally got around to turning something besides pens and bee hives. This is cherry that was cut about 5 or 6 years ago. Got some tool marks inside and outside as I jockeyed back and forth between centers and the chuck. Figured out how to part it without the piece flying into the Netherworld. A real learning experience for me. Two coats of WOP. Had to grind a round nose gouge to make a side grind tool. Would have been better finish if I had only stuck to the chuck or the spur drive. Stuck to the chuck??? I made a Dr. Seuss rhyme!
20200217_132253.jpg
 
Last edited:
John, that's a very nice end grain piece. You've got a real good finish. IMHO end grain hollowing is one of the most difficult things we turners do. The tools marks are normal in early end grain work and get better over time as you gain experience. You recognize what they are and that's a good start to getting rid of them. Now do 50 more and the skills will become locked in!
 
One of our club members held a class at my shop last Friday (Valentine’s Day) on making a hook tool. Best way to hollow end grain that I’ve seen. Can I say I took to the hook?
 
John Torchick said:
Finally got around to turning something besides pens and bee hives. This is cherry that was cut about 5 or 6 years ago. Got some tool marks inside and outside as I jockeyed back and forth between centers and the chuck. Figured out how to part it without the piece flying into the Netherworld. A real learning experience for me. Two coats of WOP. Had to grind a round nose gouge to make a side grind tool. Would have been better finish if I had only stuck to the chuck or the spur drive. Stuck to the chuck??? I made a Dr. Seuss rhyme!
View attachment 32091
Click to expand...
Well done!! I wish I had my first "real turning" Keep it, number it #1.
 
John Torchick said:
Stuck to the chuck??? I made a Dr. Seuss rhyme!
Click to expand...

I consulted the official AAW Moderator Rule Book of Improbable and Obscure Offenses and it says that you are forgiven for a first time offense of uttering (or typing) a Dr.Seuss rhyme.

Very nice first "real" turning. My first several attempts were "unreal" (and, not in a good way).
 
Many thanks to all. Got a piece on the lathe now. Will be end grain.
Bill, I could have quoted a politician but no one would believe me.:p
 
You must log in or register to reply here.
Back
Top