• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • February 2026 Turning Challenge: Cookie Jar! (click here for details)
  • Congratulations to Chad Eames for "Red Tines" being selected as Turning of the Week for February 23, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

For sale Oneway 1224 Southern CA SOLD

Status
Not open for further replies.
J

Java DeLaura

Joined
Nov 13, 2024
Messages
19
Likes
8
Location
Culver City, CA
  • This is a stock picture; this is the model I am selling. I will post pictures later today of my actual lathe. I wanted to get up quickly in time for holiday gifting! The lathe is in very good condition. Asking price is 1,800.00 Pick up is in Culver City CA. Very easy access from the driveway. Please let me know if you have any questions.
  • There is a standing platform included if you like to raise you up 6" for optimal ergonomic positioning for the shorties like me
  • There are accessories included, tool rests, extra drive belt etc. I just have to sort them out from what I am keeping so I can list and post a pic.
  • Part No. 1224 - 1224 LATHE


GENERAL DIMENSIONS

■ Spindle Height: 44½”

■ Power Input: 220V, Single Phase

■ Length x Width: 47 x 23½”

■ Bench Height: 30”

■ Weight: Approximately 300 lbs.



12½” swing over the bed (9” swing over Banjo) 24” between centers

11” Stainless Steel Toolrest with 1” Post

2 step pulley (50 - 2000 / 100 - 4000 rpm)

Two position Control Box

Spindle is hardened and ground

Spindle Thread: 1” - 8tpi RH (inboard ¾” - 16tpi RH (outboard)

7/16” thru hole (in spindle)

24 position indexing

#2 Morse Taper in headstock & tailstock

Forward & Reverse with two pre-programmed accel / decel settings

1HP Motor

High Performance Powder Paint on Stand & Lathe Cast Iron Tailstock with Acme thread & 3” quill travel Patented clamping mechanism in Banjo

Offset Bed for easy clean up
 
Last edited:
Status
Not open for further replies.
Back
Top