For Sale: VicMarc VL-300 Lathe

[Jerry Mollenhauer]

Due to ill health, I am selling my Variable Speed VicMarc VL-300 Lathe, (picture at left) 48 " bed, about 28 high-quality knives, Robert Sorby, Crown, and others;
1-Oneway Termite Hollowing Tool Package, bit and handle
1-Hollowing Tool Package, bit and handle similar to above, with 3/4 circular bit
NOVA Woodworm Screws
Robert Sorby # 809H 3/4” Oval Skew Lathe Turning Tool Overall Length 16 1/4”
Robert Sorby , 1/4” Wide Bedan”
Digital Kitchen Scale Stainless Steel Food Scale 22 lb 10kg
Wood Moisture Meter
2-Robert Sorby Double-Ended Caliper2
1-SORBY Hollow Master, Full-Sized
1-Wolverine Vari-Grind 2 Jig Only
1-Wolverine Skew Grind Attachment
1-Wolverine Grinding System with VARI-GRIND jig
1-Hardwood Scraper 3/4"
1- 1/2" Robert Sorby #842FLH Fingernail Bowl Gouge
2-sets PSI Woodworking LCSIDE2 Round End Inboard Side Scraper 2pc Chisel Set
1-Neiko 01407A Electronic Digital Caliper
1-PSI Woodworking LCHSS8 Wood Lathe 8pc HSS knives Set (Cheap set of 8 knives for beginners.)
1-Crown Tools 252 / Big Horn 24133 1-1/4 Inch Oval Skew Chisel
1-Nova G3 chuck body & jaws
1-grinder with 180 grit CBN wheel, one stone wheel
1-3 Pcs Carbide Lathe Tool
Several additional custom-made HSS tools
Many other misc accessories and face plates, air-powered face shield/dust mask

Price for all is $4800, can load, or bring tilt trailer and pallet jacks Please respond here or text me at 612 877 1275 with questions, I will reply to all.​

Also selling 24" diameter 48" long vacuum drying wood kiln setup, works well, top quality vacuum pump, hardly any use, 2 heat matts, all valves, gauges, timer, etc. $850.00 OBO.

 

[Neil McWilliams]

Due to ill-health, I am selling my Variable Speed VicMarc VL-300 Lathe, 48 " bed, about 28 high-quality knives, Robert Sorby, Crown and others;
Oneway Termite Hollowing Tool Package, bit and handle
NOVA Woodworm Screws
Robert Sorby # 809H 3/4” Oval Skew Lathe Turning Tool Overall Length 16 1/4”
Robert Sorby 830H-1/8, 1/8” Wide Standard Parting Tool 13 ½”
Digital Kitchen Scale Stainless Steel Food Scale 22 lb 10kg
Wood Moisture Meter
2-Robert Sorby Double-Ended Caliper2
1-SORBY Hollow Master, Full-Sized
1-Wolverine Vari-Grind 2 Jig Only
1-Wolverine Skew Grind Attachment
1-Wolverine Grinding System with VARI-GRIND jig
1-Hardwood Scraper 3/4"
1- 1/2" Robert Sorby #842FLH Fingernail Bowl Gouge
2-sets PSI Woodworking LCSIDE2 Round End Inboard Side Scraper 2pc Chisel Set
1-Neiko 01407A Electronic Digital Caliper
1-PSI Woodworking LCHSS8 Wood Lathe 8pc HSS knives Set (Cheap set of 8 knives for beginners.)
1-Crown Tools 252 / Big Horn 24133 1-1/4 Inch Oval Skew Chisel
1-Nova G3 chuck body & jaws
1-grinder with 180 grit CBN wheel, one stone wheel
1-3 Pcs Carbide Lathe Tool
Many misc accessories and face plates

​

Please post prices.

 

[Jerry Mollenhauer]

Please post prices.

Thanks Neil, done.

 

[Kevin Jenness]

If you are willing and have time it would be interesting to see how you set up your homebrew vacuum kiln.

Sorry to hear about your health problems. I too have been struggling but not ready to throw in the towel- it sucks. Your asking price seems fair, best of luck with everything.

 

[Jerry Mollenhauer]

If you are willing and have time it would be interesting to see how you set up your homebrew vacuum kiln.

Sorry to hear about your health problems. I too have been struggling but not ready to throw in the towel- it sucks. Your asking price seems fair, best of luck with everything.

Kevin, I gleaned info from the internet about how to build it.

View: https://www.youtube.com/watch?v=-I9DygHrLCo


Also, I bought on Amazon-

Vacuum Kiln Drying for Woodworkers: How to Build and Use a Vacuum Kiln for Drying Wood Paperback – May 14, 2017​

by Joshua Salesin (Author) It's a journey, and don't buy a cheap vacuum pump, it won't last. I got a good one and am very satisfied with it. I hope this helps, Jerry
I wish I could have bought a dryer like mine for the price I listed it at. Lot of hours to get it right. Good luck!