• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • It's time to cast your vote in the February 2026 Turning Challenge. (click here for details)
  • Congratulations to Gabriel Hoff for "Highly Figured Masur Birch Round Bottom Box" being selected as Turning of the Week for March 2, 2026 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

FREE Vicmarc 3/4"x16 Chuck Adapter (for VM90/100)

Status
Not open for further replies.
Scott Kershaw

Scott Kershaw

Joined
Oct 5, 2019
Messages
150
Likes
60
Location
Rio Rancho, NM
Website
www.cutthroatwoodworks.com
FREE:

One Vicmarc VM100 adapter with 3/4"x16" thread for spindle (used with an old Record Power lathe). I'd ask that you please cover the modest cost of shipping.

Please reply here via PM and we can connect from there. However, since my email is required, you may email cutthroatwoodworks@gmail.com.

Thanks,
Scott
 

Attachments

  • IMG_0979.jpeg
    IMG_0979.jpeg
    364.4 KB · Views: 4
  • IMG_0980.jpeg
    IMG_0980.jpeg
    505.6 KB · Views: 4
  • IMG_0981.jpeg
    IMG_0981.jpeg
    490.4 KB · Views: 4
Status
Not open for further replies.
Back
Top