• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • Congratulations to David Bartell, People's Choice in the March 2026 Turning Challenge (click here for details)
  • Congratulations to Chris Lawrence for "Dragon's Grip" being selected as Turning of the Week for March 30, 2026 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Friction Polish

Joined
Nov 24, 2024
Messages
9
Likes
1
Location
Liverpool, ny USA
I made a cherry bowl this morning and applied skklerewing friction polish to it. I did a good sanding job before applying finish. It looks pretty good but I would like a little more shine to it. Can I apply a 2nd coat to accomplish that? Do I have to wait a certain amount of time before I do that? I have a lot of time in this bowl. Would hate to screw it up now!
Thanks!
 
I use U-Beaut Shellawax and with this one you can go over as often as you wish. I dont imagine yours would be much different
 
I have tried the friction polish before and while it looks nice, I wouldn't use it on anything that gets handled a lot like drawer pulls or wood boxes.

robo hippy
 
I use mylands too for things that don't get handled a lot. And since it's shellac, don't use it for bottle stoppers or anything that might be touched by alcohol or even water. With a good coat of renaissance wax can help with fingerprints.
 
Both shellac and lacquer (cellulose) friction polishes are evaporative curing and each coat “melts into” the previous coat, creating a homogenized finish. You can do as many coats as desired as long as the maximum film thickness is not exceeded.

Initial 2-3 coats, which are sealing coats, are “in the wood”, not on top, and just a few minutes between coats is enough (let volatile solvents flash). More time between coats is needed as a film starts to build. A good check is to sand an area with hi grit, if it dusts and is not gummy, its ready for another coat.
 
I use it occasionally, don't know if it's technically a friction polish but it's been called that. Wondered if anyone else used it? Maybe the original poster hadn't heard of it. Just making conversation.
 
Back
Top