• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • February 2026 Turning Challenge: Cookie Jar! (click here for details)
  • Congratulations to Chad Eames for "Red Tines" being selected as Turning of the Week for February 23, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Help I need a drive belt for a Bonny Klein lathe

Status
Not open for further replies.
Contact Belts For Anything in Lafayette, LA. If they don't have it then nobody makes it. If there is a size marked on the belt or if you can describe it to them, they are very knowledgeable and should be able to find the right belt for you. I haven't seen what they look like, but my guess would be that they are a three rib J-section belt like the one used on the Jet mini lathe. You could also contact Bonnie Klein to see if she could point you to a supplier or tell you the type and size.
 
Bill Boehme said:
Contact Belts For Anything in Lafayette, LA. If they don't have it then nobody makes it. If there is a size marked on the belt or if you can describe it to them, they are very knowledgeable and should be able to find the right belt for you. I haven't seen what they look like, but my guess would be that they are a three rib J-section belt like the one used on the Jet mini lathe. You could also contact Bonnie Klein to see if she could point you to a supplier or tell you the type and size.
Click to expand...

thanks very much for the info. they are getting me the belts. Really nice helpful people to work with.
 
Status
Not open for further replies.
Back
Top