• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Jim Hills for "Journey II" being selected as Turning of the Week for May 6th, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Holdfast Vacuum Generator

Charles Cadenhead

Charles Cadenhead

Joined
Dec 28, 2019
Messages
460
Likes
492
Location
Tallahassee, FL
I recently purchased a Holdfast vacuum system and I hooked it up today. When I turned it on I noticed there was air leaking out from around the on/off lever of the generator (lever in the picture). I ruled out the intake and outtake for the leak so I'm reasonable sure the leak is from the lever. For those of you who have this system is leaking air normal? Thanks!
 

Attachments

  • IMG_20200410_142218765.jpg
    IMG_20200410_142218765.jpg
    256.1 KB · Views: 16
Glenn Lefley

Glenn Lefley

Joined
Jul 10, 2017
Messages
825
Likes
666
Location
Windermere, British Columbia
Conner Cadenhead said:
I recently purchased a Holdfast vacuum system and I hooked it up today. When I turned it on I noticed there was air leaking out from around the on/off lever of the generator (lever in the picture). I ruled out the intake and outtake for the leak so I'm reasonable sure the leak is from the lever. For those of you who have this system is leaking air normal? Thanks!
Click to expand...
Look at specs on sheet with holdfast product.67DF6187-2029-4D0A-AEC9-52BBD93F380F.jpeg
 
You must log in or register to reply here.
Back
Top