• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • March 2026 Turning Challenge: Olla! (click here for details)
  • Congratulations to David Wyke, People's Choice in the February 2026 Turning Challenge (click here for details)
  • Congratulations to Dave Belll for "Torus Teapot" being selected as Turning of the Week for March 9, 2026 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

HOLLOWING ARM BRACES

Status
Not open for further replies.
Rick Anderson

Rick Anderson

Joined
Jul 7, 2007
Messages
35
Likes
11
Hollowing Arm Brace.jpg Sorby Arm Brace.jpg 2 HOLLOWING ARM BRACES. 1 is the Robert Sorby RS2000. I'm not sure what make/model of the other one....possibly Dennis Stewart. Good condition. $50 each or both for $90 plus actual shipping cost.
Rick Anderson
rick98227@yahoo.com

Braces are SOLD!
 
Last edited:
The Sorby has a 3/4" bore and is the one with the knob for tightening. The other brace is also 3/4" bore and uses an Allen screw for tightening.
 
Status
Not open for further replies.
Back
Top