• May 2025 Turning Challenge: Long Neck Hollowform! (click here for details)
  • Congratulations to Phil Hamel winner of the April 2025 Turning Challenge (click here for details)
  • Congratulations to Paul Hedman and Donna Banfield for "Fire and Ice" being selected as Turning of the Week for 5 May, 2025 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Hunter Carbide Tools!

T

Thom Schuck

Joined
Mar 4, 2023
Messages
36
Likes
37
Location
Portland, OR
To my fellow turning genius’s. Today was the day. I was able to return to my lathe. Today was the first time I used a carbide tool. I used the Viceroy that Mike Hunter sold to me. My world changed. What a total joy turning a bowl offboard with my lathe set up the way we designed it. I turn in a wheelchair. I was in my powerchair in a crosswalk and I got run over by a drunk driver. She was 15 years old and went over me at 45MPH. Crunch. I got hurt bad. I have been busy working on getting my shop rebuilt at lap level. Last night I decided I was fit enough to turn. I had a blank of Birch mounted up ready to go. It dried while mounted on my machine. Hunter tools are golden. So to end… I have the small Viceroy. For the inside of a bowl what is my next carbide tool? Now for spindle work and the outside of a vessel what tool would that be? Yes I have asked before. I lost a lot of memory….
Thanks Much,
Thom Schuck
Portland, Oregon
 
Thom Schuck said:
To my fellow turning genius’s. Today was the day. I was able to return to my lathe. Today was the first time I used a carbide tool. I used the Viceroy that Mike Hunter sold to me. My world changed. What a total joy turning a bowl offboard with my lathe set up the way we designed it. I turn in a wheelchair. I was in my powerchair in a crosswalk and I got run over by a drunk driver. She was 15 years old and went over me at 45MPH. Crunch. I got hurt bad. I have been busy working on getting my shop rebuilt at lap level. Last night I decided I was fit enough to turn. I had a blank of Birch mounted up ready to go. It dried while mounted on my machine. Hunter tools are golden. So to end… I have the small Viceroy. For the inside of a bowl what is my next carbide tool? Now for spindle work and the outside of a vessel what tool would that be? Yes I have asked before. I lost a lot of memory….
Thanks Much,
Thom Schuck
Portland, Oregon
Click to expand...
 
You must log in or register to reply here.
Back
Top