Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
Congratulations to Jim Hills for "Journey II" being selected as Turning of the Week for May 6th, 2024
(click here for details)
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Looks like you left a drop when you wiped off the excess. Or maybe a thin extra amount puddled there.
Probably disappear with a grey scotch brite. Or a 320 sanding - will gum up the paper
Keep shifting to clean abrasive or the Waterlox collected on the abrasive will make smudges on the surrounding surface. Smudges will come off with abrasive too. Just better not to make any.
feel for it with your finger to be sure the surface is smooth.
once it’s gone it will totally disappear with the next coat or two of Waterlox.
I'd treat it just like a drip on flatwork. Cab scraper or razor to cut off as much as possible, then let it dry for a day or two. That way, you don't have to deal with the mess of gummed up sanding media possibly damaging surrounding areas.
Agree with scraping off the majority with card scraper or razor. You could then wet sand that area with ms, let dry, then wet sand with the next coat of waterlox, wiping it pretty much dry when finished, then add additional coats as desired.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.