• It's time to cast your vote in the April 2025 Turning Challenge. (click here for details)
  • Congratulations to Steve Bonny for "A Book Holds What Time Lets Go" being selected as Turning of the Week for 28 April, 2025 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Jamieson Hollowing System almost complete

Status
Not open for further replies.
J

Jim McLain

Artist
Joined
Apr 7, 2011
Messages
270
Likes
1,957
Location
Socorro, New Mexico
Website
www.lucadecor.com
I have a Jamieson Hollowing system including the bar holder, back rest, 3/4 inch bar, Jumbo Boring Bar, 3/8 inch diameter straight swivel tip assembly. The back rest has a 9 inch tube for a 22-24 inch swing lathe but could be cut and retapped to fit any lathe. Missing parts include the 3/8 bent assembly and the laser assembly. Over $500 value.

I will throw in the miniature tool set pictured.

Will trade for new a Hamlet Glenn Lucas M42 GL6 Bottom Finishing Gouge shipped to me. Currently on sale at Craft Supplies or $170.

Contact me at 575-517-6535 or jasjmclain@msn.com
 

Attachments

  • E036E4CC-E61F-47C9-9A6C-D1773267CF71.jpeg
    E036E4CC-E61F-47C9-9A6C-D1773267CF71.jpeg
    107.1 KB · Views: 93
  • 867978D8-6A09-4E6E-91BF-C7570CC6C3BF.jpeg
    867978D8-6A09-4E6E-91BF-C7570CC6C3BF.jpeg
    81.3 KB · Views: 89
Last edited:
Entire laser parts missing, right? No mount, arms, coupler, etc, not just the laser missing? Assume they were repurposed for different hollower?
 
Status
Not open for further replies.
Back
Top