• July 2025 Turning Challenge: Turn a Multi-axis Weed Pot! (click here for details)
  • Congratulations to Kent Reisdorph for "Sugarberry Bowl" being selected as Turning of the Week for July 14, 2025 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Log to bowl dimensions

C

Cody Litster

Joined
Oct 8, 2023
Messages
8
Likes
11
Location
Petersburg, AK
I have been asked to turn a 19 inch salad bowl. I turn from locally sourced woods. This bowl will start as a log that I break down myself. I am looking for suggestions on two things. 1) How deep should a 19 inch diameter salad bowl be? 2) what diameter of log would I need to comfortably twice turn a nice shaped bowl of that size?

This will be my biggest creation to date and a little intimidated on where to start.

Thanks,
Cody
 
Following the 10% rule for rough turn, it needs to be ~ 21” rough out dia. Will lose a little dia allowing for the pith, so inside bark min dim ~23. It will be a good size tree. If a utility bowl, look up some similar sized salad mix bowls for depth. This one on amz is 9-1/2”


Heavy wet blank - how will you get it on the spindle?
 
Last edited:
Everyone has their favorite dimension for depth to width for salad bowls. I like something in the 3:1 range. 19" bowl would be around 6-7" deep.

You may be able to find dimensions on-line with some of the major production bowl turners. Holland Bowl Mill Company has a 20" Maple bowl that's 6.5" deep.
 
In my years of making and selling bowls, one person will come in and pick up a shallower bowl and say I like these because it is easier to toss a salad in. The next person comes in and picks up a deeper bowl and says the same thing. I don't toss my salads because all of the good stuff goes to the bottom. Since I once turn my bowls and let them warp, I would want a 20 inch log, minimum to turn a 19 inch bowl. Generally a bowl that large will have to sit out on the table between uses since most cabinets won't hold them. Ask the person who the bowl is going to be for to show you what they now use.

robo hippy
 
I sell a lot of large salad type bowls and my largest was 18” but most average 15” to 17-1/2”. I can turn larger but really don’t see the need. Average depth ranges from 4-1/2” to 6-1/2”. When people pick up the largest bowl I tell them to think about where they are going to put it and you don’t realize how large the bowl is until you sit it on a table. I tell them if you are putting this on a coffee table it will take up the entire table and usual the entir center of a dinning room table. I want people to use the bowl and display it not get home and realize it’s too big. I’ve had people then choose a smaller bowl and some go with the larger size.
I agree with Robo, ask them to show you what they are using now. You could cut a 19” circle out of cardboard and see how much room it takes up.
I found this on line about salad bowl size, so you could ask them how many they want to serve from the bowl.

1752707680235.png
 
In determining the diameter of the log, you also have to factor in the bark and cambium, and whether you'll be taking off the sapwood. As an example, with doug fir the bark can be 2" thick on a tree of that size, which would add 4" to the diameter. With walnut, you'd want to turn away all the white/gray sapwood.

Any way you slice it, you're gonna need a big saw. Good thing you're in the rain forest with maybe some old growth trees.

BTW, with something of that size, I'd use a face plate. And I'd suggest turning a large practice piece first, if you haven't turned big before. With good speed control, it's really not any different than turning smaller blanks, but the pucker factor will be at play and you'll do a better job when you're past the white knuckle phase.
 
You must log in or register to reply here.
Back
Top