I have turned alabaster on lathe for about 4 years and on the bed side it seems to have developed a slight wobble. Its ok on outboard side. I have put some really heavy stones on lathe, ones that take 2 men to pickup. Was wondering if it could be bearing on bed side. Can't detect and movement. Is possible to get parts for lathe? hope someone can help. I am still turning stone, just have to be careful to not set rpms too high on large stone.
-
Congratulations to Rick Moreton, People's Choice in the July 2025 Turning Challenge (click here for details) -
Congratulations to Michael Foster for "Costa II" being selected as Turning of the Week for July 28th, 2025 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Mc 908 woodfast lathe
- Thread starter Richard Flottemesch
- Start date
Sounds like you need new bearings in the headstock for the spindle. You can get them at Grainger or McMaster-Carr or other similar places.
I ordered Timken bearings for my Woodfast 408 on Amazon for $10 each.