• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • Congratulations to Bernie Hyrtzak, People's Choice in the January 2026 Turning Challenge (click here for details)
  • Congratulations to David Croxton for "Geri's Basket Illusion" being selected as Turning of the Week for February 2, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

McNaughton Micro Coring system

Tim L

Tim L

Joined
May 4, 2008
Messages
38
Likes
0
Location
Central Michigan
I thought I should start a new post and sorry for hijacking the other one. :(

I just received the Micro McNaughton Coring System from the UPS guy last night. Upon inspection it looks like some of the parts have been used, I purchased a NEW set. Since it appears my set has been monkeyed with I just want to make sure I have the correct coring blades for the Micro. The blades I have fit into the large end of the handle. They will not fit in the small end. I am just guessing that the small end of the handle would accept the micro blades. If anyone has the micro set please let me know if I have the correct blades. The blade height is about 15mm or about 19/32" and they are about 3.02mm thick or 1/8"

If anyone can help me out I would appreciate it.
Tim.
 
Last edited:
Tim
I have the micro (and the small and regular) set. As I recall all the blades are the same "height" at the handle. At least they all fit in the handle. Actually I use the micro handle throughout.
The micro handles are thinner, and without going out and measuring, I would say they are the right handles, even more so if they are all the same size.
 
You must log in or register to reply here.
Back
Top