-
July 2025 Turning Challenge: Turn a Multi-axis Weed Pot! (click here for details) -
Congratulations to Kent Reisdorph for "Sugarberry Bowl" being selected as Turning of the Week for July 14, 2025 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Mini Lathe bearing info
- Thread starter mikeplumb
- Start date
Go to the Mfg. web site.
CA
CA
If you are able to get the inside diameter, outside diameter and the overall width of the bearing to be replaced most any bearing store can get you an excellent replacement. Hope this helps,
Jim :cool2:
Jim :cool2:
Bearings
Other than ordering from the lathe manufacturer, if you are able to walk into a bearing dealer with the old bearings and the spindle, they can get about any size bearing you need (and better quality than OEM). Try these folks >> http://www.timken.com/industries/industrial/faq.asp
Other than ordering from the lathe manufacturer, if you are able to walk into a bearing dealer with the old bearings and the spindle, they can get about any size bearing you need (and better quality than OEM). Try these folks >> http://www.timken.com/industries/industrial/faq.asp