• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • February 2026 Turning Challenge: Cookie Jar! (click here for details)
  • Congratulations to Matt Carvalho for "Red Mallee Folded Form" being selected as Turning of the Week for February 9, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

My Christmas ornament project

P

Perry Hilbert

Joined
Sep 27, 2017
Messages
408
Likes
210
Location
Windsor, Pennsylvania
Each year I make ornaments and donate them to the local Lions club to sell I have already started for this year.
6DnG5Lr.jpg


The spindle on the left is what I start with. It is ten inches long. (I bought three hundred fifty of them for ten dollars) I turn them into rough shapes using some of the original spindle's lines. sand them and then separate them using a narrow kerf hand saw into individual pieces and finish sanding. They are then ready for finishing/painting, etc. For the rough fish shape, I use a belt sander to flatten the tail. The rough individual pieces on the right are close to being ready for paint/finish, etc.
 
What a bargain! Lions Club is a great organization. The fish shapes would also make good fan and light pulls.
 
Those would also work nice for making (2) small tool handles for small turning tools. They would also work great for (2) handles each for making ferro rod fire starters which I have been making lately.
 
BTW: The tapered end tabs of the spindles are just right for mounting in a Morse No 1 socket. and the tail stock live center with the removable center taken out. Because it is just a friction drive and such a narrow spindle, the few catches I get, do not tear up the work. .
 
You must log in or register to reply here.
Back
Top