At our primary home in NC, I have a dedicated shop, so no issue. In our new second home, the “shop” is going to be in a 2 car garage shared with a car. I can get away with half the garage for shop space, but my wife doesn’t want chips, etc., everywhere on “her” side. Putting up a wall isn’t an option, so appreciate any thoughts. I’m going to have a carving space in “my” side and can contain that for both hand and power carving, but I’d really like to do some turning while at our other home for 5 months per year. I’m going to also look for a shared space, but I suspect that may not be available on the island.
-
It's time to cast your vote in the January 2026 Turning Challenge. (click here for details) -
Congratulations to Ric Taylor for "Black Ash Burl" being selected as Turning of the Week for January 26, 2026 (click here for details) -
AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion at thread here or the AAW registration page
-
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Need help with setting up lathe in shared garage space
- Thread starter John Redding
- Start date
Hang up some shower curtains to contain the shavings.
When I'm turning wet wood, I run a wire across where I want the "wall" and hang a cheap clear shower curtain that can be slid out of the way when not needed.
For long runs you could suspend the wire from the ceiling with some kind of bracket.
Wyatt beat me to it
For long runs you could suspend the wire from the ceiling with some kind of bracket.
Wyatt beat me to it
It's all about compromise. I think I'd separate the garage into two spaces by hanging tarps as a wall. Tack them to the ceiling (into roof framing) through the tarp eyelets. (May want to mount 2x4 to the roof framing first, then mount the tarp to that 2x4.) At the bottom of the tarps, tack 2x2 lumber to the tarp to help control movement of them. And pick a tarp color you can both live with.
Dust collection will be important to keep dust from settling on, and in, her car. Good luck.
Dust collection will be important to keep dust from settling on, and in, her car. Good luck.
yes good luck! Dust collection to the lathe along with some sort of atmospheric dust control as well
I guess before you start hammering lumber in place, is this winter home a rental, or do you own it? If it's a rental, the actual owner may not thinking highly of nailing things in place.
I will be using privacy curtains like you see in hospitals. My new shop will have a 10’ ceiling and shower curtains are too short.
I covered the car with a SUV sized cover
Harbor Freight tarps are cheap and in different sizes. I use one to cover my lawn tractor...new one every three or four years.
You’re set on the garage but any thought about turning outside? I turn outside the garage (southern CA) on the side of the house and cover the lathe with a heavy duty cover when not in use.