Need Powermatic Inverter Parameter Settings List

[Bill Siler]

I've ordered a Delta Series 1 inverter, model number VFD015S21. I know I'll need to set parameters after I install it. A lot has been written here about programming inverters for PM lathes, but as best I can tell, a list of the parameter settings for this particular inverter hasn't been posted. Does anyone have such a list?

 

[Darryl Fective]

What model lathe and is that the same as what was on it? I think I have a list for the 3520 on my hard drive or on google somewhere.

 

[Richard Coers]

PM Control 1

Doc Green's woodturning tips.

www.docgreenwoodturner.com

 

[Brian Gustin]

I would think mustard monster website would have that info too? Surprised no one has linked that yet (or is it still up and running?)

 

[Dean Center]

The parameters are the same for all VFDs and have been published on this forum in the past. The Doc Green info is very helpful, too. The designation for each of those parameters will vary from brand to brand. The manual you get with the VFD will tell you how that brand refers to each one. Sticking with the Delta line means your wiring of the new VFD will be straightforward.

 

[Bill Siler]

What model lathe and is that the same as what was on it? I think I have a list for the 3520 on my hard drive or on google somewhere.

It's a 3520B, and I think the inverter I've ordered will be identical to the old one.

 

[Bill Siler]

PM Control 1

Doc Green's woodturning tips.

www.docgreenwoodturner.com

The Doc Green site has good information for the wiring connections, but as far as I can see, he doesn't discuss the dozens of programmable parameter settings that control things like ramp-up speed, etc.

 

[Bill Siler]

I would think mustard monster website would have that info too? Surprised no one has linked that yet (or is it still up and running?)

I checked that site, but none of document links were working.

 

[Darryl Fective]

 

[Darryl Fective]

The above sheet was found in my search. I have no clue where/when I got it or who created it. I also found this longer pdf document that has each parameter with the factory setting and changes that I made.

 

[Larry Komroff]

I am pretty sure this is what I read from my 3520B inverter.

 

[Bill Siler]

The above sheet was found in my search. I have no clue where/when I got it or who created it. I also found this longer pdf document that has each parameter with the factory setting and changes that I made.

Thanks! This is just what I was hoping to get.

 

[Bill Siler]

I am pretty sure this is what I read from my 3520B inverter.

Thanks! This is what I was hoping to get.

 

[Gerald Lawrence]

I got this from this site and the post said this is all that needs to be set:

 

[Bill Siler]

I got this from this site and the post said this is all that needs to be set:
View attachment 57574

Thanks! I'll compare this to the other parameter lists I've gotten in response to this post.