• Congratulations to Bernie Hyrtzak, People's Choice in the January 2026 Turning Challenge (click here for details)
  • Congratulations to David Croxton for "Geri's Basket Illusion" being selected as Turning of the Week for February 2, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

New at Pens, need help

G

gary7

Joined
Dec 1, 2005
Messages
45
Likes
0
Location
St. Joseph, IL
I started turning just this year and now would like to do pens, key chains etc. I have been looking at the Professional Pen Turning Mandrel sold by Woodcraft. Are there other items I need like bushings etc to get started with pen and key chain turning? Are the bushings reusable? Do I need different sizes? Any sites or articles I can look at to help me get started with these? As always, Thanks.
 
Try here.

http://www.penturners.org/forum/default.asp

and these http://www.woodturnerruss.com/Pen10.html

You will need the following:
saw
drill press
drill bit (size may vary per kit)
vise to hold the wood while drilling
pen kit
pen end mill
bushings (different per kit)
mandrel (there are 2 sizes A and B)
pen press
glue (CA, Gorilla glue, etc.)
finish (of your choice)

Good luck!

By the way...check the kits from
CSUSA http://www.woodturnerscatalog.com/catalog/pen_kits.html
and
Berea's at ArizonaSilhouette http://www.woodturnerscatalog.com/catalog/pen_kits.html
 
Last edited:
I've attempted to turn pens on my full size lathe, but found it much better to use my mini lathe. I got mine from Penn State. There are several good companies that have a full range of the items you will need. The list that Dario gives will be very helpful to you. Two of the companies that I've been very satisfied with are, Penn State and Craft Supplies U. S. A. There are naturally others, but these are the ones I use most. I've started using 2 part epoxy more than other glues, but that is just a matter of choice.
 
You must log in or register to reply here.
Back
Top