I'm considering getting a set of #5 or 6 jaws for a Oneway Stronghold chuck, but am wondering if aluminum is a good choice - and why Oneway made that choice? Strictly weight savings?
-
Beware of Counterfeit Woodturning Tools (click here for details) -
Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details) -
Congratulations to John Shannon for "Walnut Bowl" being selected as Turning of the Week for May 27, 2024 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Oneway aluminum jaws
- Thread starter Kevin Jenness
- Start date
I have a #5 set, used dozens of times, work great just like all Oneway profiled jaws. The largest I’ve turned is ~ 15” dia x 15” tall hf.
Why AL? My assumption is weight. A piece large enough to need these jaws is heavy, at least initially. Using AL makes it easier on the lathe motor to start/stop. The AL has been plenty strong in my use - do not torque the screws down, just “snug up”. Overtorque could result in galling under the screw head.
Why AL? My assumption is weight. A piece large enough to need these jaws is heavy, at least initially. Using AL makes it easier on the lathe motor to start/stop. The AL has been plenty strong in my use - do not torque the screws down, just “snug up”. Overtorque could result in galling under the screw head.
I have my own version of these jaws, in fact three different sets. I find they are not so vicious on the wood, especially if you have to give them an extra turn. Likewise, I made mine out of Aluminium as it is very easy to machine and it was what I had it on hand at the time.