• Congratulations to Bernie Hyrtzak, People's Choice in the January 2026 Turning Challenge (click here for details)
  • Congratulations to David Croxton for "Geri's Basket Illusion" being selected as Turning of the Week for February 2, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Osage Orange vs. Mulbery

Joined
Mar 24, 2006
Messages
64
Likes
3
Location
Beresford, South Dakota
Is there any resemblence? I was given several pieces of wood that I was told were male mulbery but looking at the pic's on the forum they look exactly alike! The wood came out of the Sioux City Iowa area has that bright gold color and after time turns brown.

Frank D.
 
Put a sliver of wood on water. Osage orange will turn the water yellow. Mulberry will not. Both trees are in the mulberry family.

Good luck.

Dave Smith

Actually finished something today in Longview, WA.
 
The trees are fairly easy to tell apart. Oasge has long thorns.

The wood itself is hard. When I make a clean cut with the gouge I notice an very slight hint of fuzz between the grain lines on the mulberry the Osage cuts very cleanly.

I learned this at the Woodshow Demonstration when
a guy said "your turning osage"
Everyone else that day had begun with "what wood it that?"

So I asked him "how He knew it wasn't Mulberry" He went on to explain he had just sawn a few thousand board feet of both and to look at the grain lines for the fuzz so anothother of many things you learn when demonstrating.

-Al
 
Back
Top